Products List
- Honed Tube
- Ready to Honed Tube
- Cold Drawn Seamless Tube
- 34CrMo / 34CrMo4 Seamless Steel Tube
- SRB (Skived and RollerBurnished) Tube/Pipe
- Chrome Plated Bar
- Hollow Chrome Plated Bar
- Linear Motion Shaft
- Stainless Steel Cylinder Rod
- Induction Hardened Chrome Plated Bar
- SAE4140 Hot Rolled Round Steel Bar
- Custom Hydraulic Cylinder
- Honed Tube
- Ready to Honed Tube
- Cold Drawn Seamless Tube
- 34CrMo / 34CrMo4 Seamless Steel Tube
- SRB (Skived and RollerBurnished) Tube/Pipe
- Chrome Plated Bar
- Hollow Chrome Plated Bar
- Linear Motion Shaft
- Stainless Steel Cylinder Rod
- Induction Hardened Chrome Plated Bar
- SAE4140 Hot Rolled Round Steel Bar
- Custom Hydraulic Cylinder
Contact Me
Provide detailed contact information to ensure we can reach you effectively.
![Hollow Chrome Plated Bar](https://eastaihydraulic.com/wp-content/uploads/2024/03/Hollow-Chrome-Plated-Bar.jpg.webp)
Hollow Chrome Plated Bar
Hollow chrome plated bars, also referred to as chrome plated tubes, are manufactured from cold drawn seamless tubes or hollow bars. The process involves grinding and precision polishing of the outer diameter, followed by chrome plating to a specified thickness. These bars are known for their chrome plated exterior on the OD (Outside Diameter), earning them the name chrome plated OD tubing as well.
EASTAI Hydraulic, a leading professional manufacturer and supplier of hollow chrome plated bars, has been serving the industry by supplying and exporting these products from China for over 15 years. If you have any inquiries or require assistance, please feel free to contact us via email at jeff@east-ai.cn. We are committed to providing a prompt response within 1 working day.
Material: CK45, SAE1045, 4140, 4340, 4340, 42CrMo4, JIS45C, 40Cr, 20MnV6, 42CrMo, SS431, SS430,
Stainless: Steel 304/316/2205, etc.
Diameter: Φ6-500mm.
Length: Maximum 20 meters.
Salt Spray Test: Meets requirements as per request.
Chrome Layer: Minimum 20/25/30/50 Micron or as customized.
Hardness of the Chrome Layer: 850 HV (minimum) – 1150 HV.
Roughness: Ra <= 0.4um.
Straightness: <=0.2/1000.
Diameter Tolerance: ISO f7/f8/f9/h8/h9 or as requested.
Roundness: Half of the tolerance ISO f7.
Heat Treatment Type: 1) Normal (no heat treatment) 2) Q+T (Quenched + Tempered) 3) Induction Hardened.
Delivery Condition:
- Hard Chrome Piston Rod (HRC 15-20);
- Quenched & Tempered (Q+T) Rod (HRC 28-32);
- Induction Hardened Rod (HRC 55-62);
- Q+T Induction Hardened Rod (HRC 60-65).
- Corrosion Resistance: Tested in natural salt spray according to ASTM B 117 for 96 hours.
Packing: Anti-rust oil applied on rod surface, with each rod wrapped in paper roll and then placed in a wooden case.
Materil | C% | Mn% | Si% | S% | P% | V% | Cr% |
Ck45 | 0.42-0.50 | 0.50-0.80 | 0.04 | 0.035 | 0.035 | ||
ST52 | 0.22 | 1.6 | 0.55 | 0.035 | 0.04 | ||
20MnV6 | 0.16-0.22 | 1.30-1.70 | 0.10-0.50 | 0.035 | 0.035 | 0.10-0.20 | |
42CrMo4 | 0.38-0.45 | 0.60-0.90 | 0.15-0.40 | 0.03 | 0.03 | 0.90-1.20 | |
40Cr | 0.37-0.45 | 0.50-0.80 | 0.17-0.37 | 0.80-1.10 |
Material | T.S N/MM2 | Y.S N/MM2 | E%(MIN) | CHARPY | CONDITION |
CK45 | 610 | 355 | 15 | >41J | NORMALIZE |
CK45 | 800 | 630 | 20 | >41J | Q + T |
ST52 | 500 | 355 | 22 | NORMALIZE | |
20MnV6 | 750 | 590 | 12 | >40J | NORMALIZE |
42CrMo4 | 980 | 850 | 14 | >47J | Q + T |
40Cr | 1000 | 800 | 10 | Q + T |
Our main business range is listed as follows:
Hollow Chrome Plated Bar/4140 Hollow Bar/ Hollow Piston Rods
Hard chrome plated rod/bar/shaft(Piston rod)
Induction Hardened Chrome Plated Bar
Hydraulic cylinder tube(Honed tube)
Carbon Seamless Steel pipe/tube
Hydraulic Cylinder Barrel
Want to purchase Our hollow chrome bars?
Please contact us through below methods for more information.