CHROME BARS
(I.H.C.P.) Induction Hardened, Chrome Plated Shaft
EASTAI 60 is a well-balanced electric furnace steel that has been stress relieved, turned, ground and polished. It is then induction hardened and electro chromium plated. This shafting material is engineered to take a high degree of sliding and rotating abrasion. The induction hardening process provides resistance to side impact and increases wear resistance. Surface hardness is Rockwell “C” 50 minimum and finish is 12/15 RMS. Call or email us for a quote.
Rigid quality standards ensure excellent internal soundness and uniformity of chemistry. Surface condition and wearability are verified. An excellent choice for hydraulic and pneumatic applications.
Induction Hardened
Chrome Plated
Abrasion Resistance
Corrosion Resistance
Polished Finish
Fatigue Resistance
| Case Hardness | Rc “50” min |
| Depth of Plating | Per Side .001″* |
| Yield | Approx. 100,000 P.S.I. |
| Elongation in 2″ | 10% |
| Reduction of Area | 38% |
| Finish | 12/15 RMS |
Available Sizes
| 1/2″ | 7/8″ | 1-1/4″ | 1-3/4″ | 2-1/2″ | 3-1/4″ | 4-1/4″ |
| 5/8″ | 1″ | 1-3/8″ | 2″ | 2-3/4″ | 3-1/2″ | 4-1/2″ |
| 3/4″ | 1-1/8″ | 1-1/2″ | 2-1/4″ | 3″ | 4″ |
| 12MM | 20MM | 30MM | 40MM | 60MM |
| 15MM | 25MM | 35MM | 50MM |
Lengths
10/12 Ft, 20/24 Ft. R/L and Custom Cuts
Typical Diameter Tolerances
| Up to 3” Round | (+.000”/-.002”) |
| Over 3” to 4” Round | (+.000”/-.003”) |
| Over 4” Round | (+.000”/-.004”) |
| Up to 38MM Round | (+.000”/-.001”) |
| Over 38MM to 60MM Round | (+.000”/-.002”) |
Applications
- Cam Shafts
- Dowel Pins
- Guide Pins
- Piston Rods
- Hydraulics Rams
